DPC WATCHDOG VIOLATION! [Fix]

Many users of Windows 10 report the incidence of DPC Watchdog Violation. They have to deal with the Blue Screen and a 0x00000133 bug check code. This is a frustrating issue that many users find difficult to resolve. The computer will automatically restart preventing you from saving all your crucial data and any task you were working on while the error occurred. Here is a detailed guide on understanding the DPC watchdog violation error, the reasons and the fixes that help resolve the issue successfully.

What Is DPC Watchdog Violation Error?

DPC Watchdog Violation (error code: DPC_Watchdog_Violation) is a common issue in the Windows operating system. It’s occurred due to some specific reasons, like unsupported SSD firmware, old SSD driver version, hardware incompatibility issues, or system files are corrupted.

By that, if you are using an SSD on your Windows computer, the first thing you need to check is the firmware version of the SSD and make sure it’s up to date.

Also, to eliminate incompatible hardware issues, remove any hardware from your computer that you think are the problems, especially any new hardware that you have recently plugged in the computer, and then later, this error appears.

how to fix DPC watchdog violation

Solution 0

His original fault was with the IDE ATA/ATAPI controller installed with Windows 10. The fix was to use a different driver.

  • 1. Navigate to Control Panel, Hardware, and Sound and Device Manager.
  • 2. Open the IDE ATA/ATAPI controllers section.
  • 3. Select the controller that says ‘SATA AHCI’, right-click and select Properties.
  • 4. Select the Driver tab and Driver Details. Make sure the driver is ‘iastor.sys’. If it is, carry on. If it isn’t, try another or move on to the next step.
  • 5. Select Update Driver Software, Browse and Let me pick from a list of devices.
  • 6. Select ‘Standard SATA AHCI Controller’ from the list and install it.

This process addresses the vast majority of DPC_WATCHDOG_VIOLATION errors in Windows 10. Otherwise, performing driver updates across the board is also considered effective. As a last resort, some users have said updating their motherboard BIOS has also fixed the error.

Solution 1 – Check your cables

As you can see, there are a number of causes for the DPC WATCHDOG VIOLATION error, but luckily most of them can be ruled out with no effort. 

For instance, the first thing you should do is check all the disk data/power cables from your computer. In some cases, if they are not properly plugged in, the system might read that the disk is unavailable and crash.

If all the cables are intact and properly plugged in, you might want to move on and check the health of the disks.

Solution 2 — Replace the iastor.sys driver

Microsoft suggests that you should replace the driver that triggers this error message, meaning the iastor.sys driver with the storahci.sys driver.

  1. Right-click the Start icon > select Device Manager.
  2. Expand IDE ATA/ATAPI controllers.
  3. Select the controller with “SATA AHCI” in its name (such as Standard SATA AHCI Controller). To verify that you’ve selected the right controller, right-click the controller, go to Properties, click the Driver tab, and then Driver Details. Verify that iastor.sys is a listed driver, and click OK.
  4. From the Driver tab > select Update Driver
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of device drivers on my computer.
  7. Select Standard SATA AHCI Controller.
  8. Click Next, then Close, and then restart the PC.

Solution 3 — Check your disk

There are a number of utilities you can use to check all the health-related aspects of your drives. For more information on the best tools that you can install to check your hard drive’s health, check out this list.

If you own an SSD, you might want to look for a firmware update (if you didn’t update it from the start). Keep in mind that if you update your SSD’s firmware, you will most likely lose all data from it.

If you want to quickly check your disk for errors, follow the steps listed below (for Windows 10 and Windows 7).

On Windows 10, you can run a disk check using Command Prompt.

Start Command Prompt as administrator and type the chkdsk C: /f command followed by entering. Replace C with the letter of your hard drive partition.

As a quick reminder, if you do not use the /f parameter, chkdsk displays a message that the file needs to be fixed, but it does not fix any errors. The chkdsk D: /f command detects and repairs logical issues affecting your drive. To repair physical issues, run the /r parameter as well.

On Windows 7, go to hard drives > right-click the drive that you want to check > select Properties > Tool. Under the ‘Error checking’ section, click Check.

Solution 4 — Update your drivers

Updating all the drivers from your computer is another way to go if you have stumbled on in the DPC_WATCHDOG_VIOLATION. Check your components for their manufacturers and models and then check their websites for Windows 7, Windows 8 and Windows 10 compatible drivers.

Also, if there aren’t any Windows 7, 8 or Windows 10 ready drivers, contact them for more information.

Still, in the updating area, you should check the website of your motherboard’s developer for BIOS updates. Sometimes, if a BIOS is getting old and you add new hardware or operating systems to it, it might not work properly.

We strongly recommend TweakBit’s Driver Updater (approved by Microsoft and Norton) to automatically download all the outdated drivers on your PC.

Disclaimer: some features of this tool are not free.

Solution 5 — Update your OS

Make sure that you’re running the latest Windows OS updates on your machine. As a quick reminder, Microsoft constantly rolls out Windows updates in order to improve the system’s stability and fix various issues. Installing the latest Windows updates on your computer could also help you eliminated the DPC_WATCHDOG_VIOLATION error.

To access the Windows Update section, you can simply type “update” in the search box. This method works on all Windows versions. Then go to Windows Update, check for updates and install the available updates.

Solution 6 — Run a full system scan

Scanning your computer for viruses is something that you should do all the time, even if you don’t have the DPC_WATCHDOG_VIOLATION error.

However, if you suffer from this issue, then you might want to scan your computer thoroughly and seek out any malware that might be hiding in it.

There are lots of great antivirus programs out there that can do a great job in searching for all kinds of malware and other errors. Check out this article to see what antivirus tool we recommend you to install on your computer.

Meanwhile, you can also use Windows Defender to scan your device.

Here’s how to run a full system scan on Windows 10 Creators Update:

  1. Go to Start > type ‘defender’ > double click Windows Defender to launch the tool
  2. In the left-hand pane, select the shield icon
  3. In the new window, click the Advanced scan option
  4. Check the full scan option to launch a full system malware scan.

Solution 7 — Check software and hardware incompatibilities issues

Most programs created for earlier versions of Windows will work on newer OS versions. However, some older programs might run poorly or even cause severe errors, such as the DPC WATCHDOG VIOLATION error.

You can run the Program Compatibility Troubleshooter to automatically detect and fix some of the most common issues.

On Windows 10, you can go to the Settings page, select Update & Security and then Troubleshoot. Under ‘Find and fix other problems’, select the Program Compatibility Troubleshooter and run it.

Hardware incompatibility is something to take into account also. If you’ve built a new computer and installed Windows 8, Windows 10 and nothing else, and you get this problem, then some components might not work well with each other or with the OS. In this scenario, you should do more research on each component and if you don’t find anything of use, you should contact the store and get some tech support.

Keep an eye out for hardware that wasn’t installed properly. Most of the time, users don’t install the RAM correctly and a part of it doesn’t make contact. If you want to check the RAM, take the DIMMs out and place them carefully back in, ensuring that you hear the click and that they are in place.

Solution 8 — Remove recently installed software

If you recently installed new software on your computer, try uninstalling the respective tools. Sometimes, third-party software may cause severe issues on your computer, including the DPC WATCHDOG VIOLATION error.

Go to Start > type Control Panel > select the program(s) recently added > click Uninstall.

Then restart your computer, and see if the issue has been solved.

Solution 9 — Run system restore

If the problem has occurred after you’ve installed a driver or modify anything on the software level of your computer, then you should do a System Restore to a point from before you’ve modified anything and see if the problem still persists.

If indeed it was something you did or installed, then this should fix your Windows 7, 8 or Windows 10 DPC WATCHDOG VIOLATION problems.

If the problem started recently, run System Restore. If this issue occurred after you installed new software on your computer, this tool helps you remove recently added apps and programs.

The System Restore option allows you to restore the previous well-performing system configuration without losing any files, except for a few customizable features and settings.

If System Restore is enabled, follow the instructions listed below (Windows 7 and 8.1):

  1. Go to Search > type system properties > open System Properties.
  2. Go to System Protection > click on System Restore.
  3. Click Next > choose the preferred restore point in the new window.
  4. Once you’ve selected your preferred restore point, click Next > click Finish.
  5. Your PC will restart and the restoring process will start.

After the procedure has been completed, check if the DPC WATCHDOG VIOLATION error persists.

Windows 10 offers a series of advanced recovery option that allows users to clean install the OS. If you’re a Windows 10 user, you can also use ‘Reset this PC’ recovery option.

  1. Go to Settings > Update & Security > click on Recovery under the left pane.
  2. Click on Get Started under Reset this PC > choose to Keep your files.
  3. Follow the on-screen instructions to complete the reset.

Video Tutorial:

Here is the step-by-step tutorial with all methods you can try. Check it out!

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept